———————————————————
Zubehör von
—
Das Original
——
Rev. 01 28/10/2014
Seite 6 von 9
Make sure that there is clearance all about your
steering angle to the fairing and the brake fluid
reservoir does not collide anywhere.
Instruction for rerouting cables hoses and wiring harness:
Throttle cable (1):
Route as original and check throttle cable for free movement on every steering
angle.
Brake hose (2):
Route as original. Turn the brake line fitting at the main brake zylinder to the front
to make sure, not to force the brake line anyway.
Clutch cable (3):
Route as original.
Wiring harness (5&6):
Route as original.
Make sure that no cable, hose or harness is bended and stays tension-free over the
whole steering angle.
The conversion kit is now completely mounted. Always check local laws and your manufacturer’s
warranty conditions for using aftermarket parts on your bike!
Ride safe and have fun!
washer Ø10,5mm
LSL-Brakebox bracket