LSIS XBL-EIMT, Руководство пользователя, Страница: 76 / 164

Chapter 5. Communication Parameters
5-24
(2) Block setting
…
(a) Mode: transmission/reception
(b) Station No.: set up correspondent station No. for receiving only
(c) Block No.
This parameter is for communicating large volume of data in multiple areas of a station, by classifying the data in
multiple blocks. The station No. and the clock No. set up at the transmission station are transmitted with the data, and at
the receiver station, data is stored in the storage area when the station and block numbers are same as those set up in
the high speed link parameters. Therefore, the block numbers have to be set at both transmission and reception station
together with the station number. The block numbers cat be set as many as
64 from „0‟ to „63‟ for each station.

Do not allocate multiple block numbers under the same station number.

200 words can be set to one block. The maximum link points are 12,800 words.
 The serial No. representing the order of registration, from „0‟ to „127,‟ not in relation with the order of communication.
(d) Read area: enabled when the block type is transmission. This is the area setting of the device for transmission
(e) Storage area: enabled when the block type is reception. This is the area setting of the device for reception.
(f) Data size (word): can be set by 1 ~200. If the data size set up in the reception mode is smaller than that of the data
received, the excess data is not stored. Therefore, only necessary volume of data can be received selectively from the
transmitter station for use.
(3) Writing high speed link parameter
Select „Write Parameter‟ from the Online menu. In the Write Parameter window, check the respective high speed link
and click Confirm button.