LSIS SV004iC5-1F, Руководство пользователя

Страница: 45 / 81

7. Function List
7-3
7.2 Function Group 1
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adjustable
during run
Page
F 0 [Jump
code] 0/60

This parameter sets the
parameter code number to
jump.
1 O
F 1
[Forward/
Reverse
run disable]
0/2 0 Fwd and rev run enable 0 X
1 Forward run disable
2 Reverse run disable
F 2 [Accel
pattern] 0/1
0
Linear 0 X
F 3 [Decel
pattern]
1
S-curve
F 4 [Stop mode
select] 0/2
0 Decelerate to stop
0 X
1 Stop via DC brake
2 Free run to stop
F 8
1) [DC Brake
start
frequency] 0/60
[Hz]

This parameter sets DC
brake start frequency.

It cannot be set below F23 -
[Start frequency].
5.0 X
F 9 [DC Brake
wait time] 0/60
[sec]

When DC brake frequency
is reached, the inverter holds
the output for the setting time
before starting DC brake.
0.1 X
F10 [DC Brake
voltage] 0/200
[%]

This parameter sets the
amount of DC voltage applied
to a motor.

It is set in percent of H33 –
[Motor rated current].
50 X
F11 [DC Brake
time] 0/60
[sec]

This parameter sets the time
taken to apply DC current to a
motor while motor is at a stop.
1.0 X
F12 [DC Brake
start
voltage] 0/200
[%]

This parameter sets the
amount of DC voltage before a
motor starts to run.

It is set in percent of H33 –
[Motor rated current].
50 X
F13 [DC Brake
start time] 0/60
[sec]

DC voltage is applied to the
motor for DC Brake start time
before motor accelerates.
0 X
F14 [Time for
magnetizing
a motor] 0/60
[sec]

This parameter applies the
current to a motor for the set
time before motor accelerates
during Sensorless vector
control.
1.0 X
1) : Set F4 to 1 (Stop via DC brake ) to view this function