LSIS SV004iC5-1F, Руководство пользователя

Страница: 33 / 81

5. Programming Keypad
5-9

Changing parameter values in Function 1, 2 and I/O group
When changing the parameter value of F 27 from 2 to 5
Function
group 1
1
-. In F0, press the Prog / Ent (

) key once.
2
-. Check the present code number.
-. Increase the value to 7 by pressing the Up (

) key.
3 -. When 7 is set, press the Left (

) key once.
4
-. 0 in 0 7 is active.
-. Increase the value to 2 by pressing the Up (

) key.
5
-. 2 7 is displayed
-. Press the Prog / Ent (

) key once.
6
-. The parameter number F27 is displayed.
-. Press the Prog / Ent (

) key once to check the set value.
7
-. The set value is 0.
-. Increase the value to 1 by pressing the Up (

) key.
8
-. Press the Prog / Ent (

) key once.
9
-. F27 is displayed after 5 stops blinking. Changing parameter
value has been complete.
-. Press the either Left (

) or Right (

) key once to go to the first
code.
10 -. Return to F0.
♣
The above setting is also applied to change parameter values in
function group 2 and I/O group.