TIWI TRANSCEIVER MODULES
USER’S GUIDE
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
LSEVK-WP-01-A2-UG
Copyright © 2010 LS Research, LLC
Page 3 of 35
1
Introduction
1.1 Purpose & Scope
The purpose of this document is to provide details regarding the setup and use of the
TiWi series transceiver module within its companion evaluation board. This document
covers a description of the evaluation board and its features and a brief tutorial on how
to operate the module evaluation board.
Further, this document will also present application guidance such that the module’s
EMC compliance will not be degraded.
1.2 Audience
This document is intended to be read by engineers and technical management. A
general knowledge of common engineering practices is assumed.
1.3 Applicable
Documents
•
[1] TiWi Datasheet-
LS240-WI-01-A20
(LSR)
•
[2 ]FCC Test Report # 310117, LS Research, LLC: September 8,2010
•
[3] SAR Test Report: FCC ID: TFB-TiWi1-01, RF Exposure Lab, San Marcos, CA:
September, 2010.
•
[4] Evaluation Board Schematics
•
[5] Ethertronics Presetta 1000423 Antenna Data Sheet.
•
[6] LSR 001-0001 Dipole Antenna Data Sheet.
•
[7] FCC OET Bulletin 62, “UNDERSTANDING THE FCC REGULATIONS
•
FOR COMPUTERS AND OTHER DIGITAL DEVICES”, February 1996.
1.4 Revision
History
Date
Change Description
Revision
10/8/2010 Initial
release.
0.0
Table 1 Revision History