TIWI TRANSCEIVER MODULES
USER’S GUIDE
The information in this document is subject to change without notice.
Confirm the data is current by downloading the latest revision from www.lsr.com.
LSEVK-WP-01-A2-UG
Copyright © 2010 LS Research, LLC
Page 20 of 35
14. Upon completion of the BiP CLPC calibration the indication panel should read “Success TX BiP”. At this point the device is
ready to be configured and tested for basic RF performance. Beginning with the TX function, select the TX tab:
15. The various 802.11 b/g/n rates can be selected and the Guard Interval Type (GI). For this example, a 802.11n rate MCS7
(65 Mbps) is selected to operated with long guard interval. Set the payload size (1200 bytes here) and the time duration
(Delay) of the inter-packet idle time (1 msec here). The packet type should be selected as “Continuous”. Preamble types
can be changed in accordance to preamble options offered for each modulation type (b/g/n).