LS ELECTRIC H100 Series, Руководство пользователя

Страница: 40 / 84

40
_ LS ELECTRIC
Fan and Pump
H100
EPID Function Group (EPID)
Code Comm. No Name LCD Display Set Range Default Attribute
*
31 0h191F EPID2 Mode selection EPID2 Mode
0 None
0: None
O
1 Always ON
2 During Run
3 DI dependent
32 1 0h1920 EPID2 output monitor value EPID2 Output -100.00~100.00% 0.00
X
33 0h1921 EPID2 reference monitor value EPID2 Ref Val - -
X
34 0h1922 EPID2 feedback monitor value EPID2 Fdb Val - -
X
35
0h1923 EPID2 error monitor value EPID2 Err Val - -
X
36 0h1924 EPID2 command source selection EPID2 Ref Src
0 Keypad
0: KeyPad Δ
1 V1
2 I1
3 V2
4 I2
5 RS-485
6 FieldBus
8 Pulse
9 V3
10 2 I3
37 0h1925 EPID2 keypad command value EPID2 Ref Set Unit Min~Unit Max Unit Min O
38 0h1926 EPID2 feedback source selection EPID2 Fdb Src
0 V1
2 V2
3 I2
4 RS-485
5 FieldBus 0: V1
O
7 Pulse
8 V3
9 3 I3
39 0h1927 EPID2 P-Gain EPID2 P-Gain 0.0~300.0 (%) 50.0
O
40
0h1928 EPID2 I-Time EPID2 I-Time 0.0-200,0(sec) 10.0
O
41
0h1929 EPID2 D-Time EPID2 D-Time 0,00-1,00(sec) 0.00
O
42
0h192A EPID2 feedforward compensation gain EPID2 FF-Gain 0.0~1000.0 (%) 0.0
O
43
0h192B EPID2 output filter EPID2 Out LPF 0,00-10,00(sec) 0.00
O
44 0h192C EPID2 output high limit EPID2 Limit Hi EPID2 Limit Lo~100.00 100.00 O
45 0h192D EPID2 output low limit EPID2 Limit Lo -100.00~EPID2 Limit Hi 0.00 O
46 0h192E EPID2 output inversion EPID2 Out Inv
0 No
0: No O
1 Yes
47 0h192F EPID2 unit EPID2 Unit Sel Refer to the EPID Unit table 0: CUST O
48 0h1930 EPID2 unit scale EPID2 Unit Scl
0 X100
2: X1 O
1 X10
2 X1
3 X0.1
4 X0.01
49 0h1931 EPID2 unit 0% EPID2 Unit0%
X100 -30000~Unit Max
Varies according
to unit setting
O
X10 -3000.0~Unit Max
X1 -300.00~Unit Max
X0.1 -30.000~Unit Max
X0.01 -3.0000~Unit Max
50
0h1932 EPID2 unit 100% EPID2 Unit100%
X100 Unit Min~30000
Varies according
to unit setting
O
X10 Unit Min~3000.0
X1 Unit Min~300.00
X0.1 Unit Min~30.000
X0.01 Unit Min~3.0000
1
EPID-32~EPID-50 codes appear when EPID-31 code is not 0(None).
2
‘9(V3)~10(I3)’ of EPID-36 are available when Extension IO option is equipped. Refer to Extension IO option manual for more detail information.
3
‘8(V3)~9(I3)’ of EPID-38 are available when Extension IO option is equipped. Refer to Extension IO option manual for more detail information