LS ELECTRIC H100 Series, Руководство пользователя

Страница: 39 / 84

H100 _
39
Energy Saving Drive
EPID Function Group (EPID) 1
Code Comm. No Name LCD Display Set Range Default Attribute
*
00 - Jump code Jump Code 1~99 1
O
01 0h1901 EPID1 Mode selection EPID1 Mode
0 None
0: None
O
1 Always ON
2 During Run
3 DI dependent
02 2 0h1902 EPID1 output monitor value EPID1 Output -100.00~100.00% 0.00
X
03 0h1903 EPID1 reference monitor value EPID1 Ref Val - -
X
04
0h1904 EPID1 feedback monitor value EPID1 Fdb Val - -
X
05
0h1905 EPID1 error monitor value EPID1 Err Val - -
X
06 0h1906 EPID1 command source selection EPID1 Ref Src
0 Keypad
0: KeyPad Δ
1 V1
3 V2
4 I2
5 Int 485
6 FieldBus
8 Pulse
9 3 V3
10 I3
07 0h1907 EPID1 keypad command value EPID1 Ref Set Unit Min~Unit Max Unit Min O
08 0h1908 EPID1 feedback source selection EPID1 Fdb Src
0 V1
0: V1
O
2 V2
3 I2
4 Int485
5 FieldBus
7 Pulse
8 4 V3
9 I3
09 0h1909 EPID1 P-Gain EPID1 P-Gain 0.00~300.00(%) 50.00
O
10
0h190A EPID1 I-Time EPID1 I-Time 0.0-200,0(sec) 10.0
O
11
0h190B EPID1 D-Time EPID1 D-Time 0,00-1,00(sec) 0.00
O
12
0h190C EPID1 feedforward compensation gain EPID1 FF-Gain 0.0~1000.0 (%) 0.0
O
13
0h190D EPID1 output filter EPID1 Out LPF 0,00-10,00(sec) 0.00
O
14 0h190E EPID1 output high limit EPID1 Limit Hi EPID1 Limit Lo ~100.00 100.00 O
15 0h190F EPID1 output low limit EPID1 Limit Lo -100.00-Lím Alto EPID2 0.00 O
16 0h1910 EPID1 output inversion EPID1 Out Inv
0 No
0: No O
1 Yes
17 0h1911 EPID1 unit EPID1 Unit Sel Refer to the EPID Unit table 1: % O
18 0h1912 EPID1 unit scale EPID1 Unit Scl
0 X100
2: X1 O
1 X10
2 X1
3 X0.1
4 X0.01
19 0h1913 EPID1 unit 0% EPID1 Unit0%
X100 -30000~Unit Max
Varies according
to unit setting
O
X10 -3000.0~Unit Max
X1 -300.00~Unit Max
X0.1 -30.000~Unit Max
X0.01 -3.0000~Unit Max
20
0h1914 EPID1 unit 100% EPID1 Unit100%
X100 Unit Min~30000
Varies according
to unit setting
O
X10 Unit Min~3000.0
X1 Unit Min~300.00
X0.1 Unit Min~30.000
X0.01 Unit Min~3.0000
1
EPID Group is displayed when PID-02 code is set to 'Yes'.
2
EPID-02~EPID-20 codes appear when EPID-01 code is not 0(None).
3
‘9(V3)~10(I3)’ of EPID-06 are available when Extension IO option is equipped. Refer to Extension IO option manual for more detail information.
4
‘8(V3)~9(I3)’ of EPID-08 are available when Extension IO option is equipped. Refer to Extension IO option manual for more detail information.