LS ELECTRIC H100 Series, Руководство пользователя

Страница: 18 / 84

18
_ LS ELECTRIC
Fan and Pump
H100
Control Circuit Terminal
Input Terminal Marks & Details
Classification Terminal Mark Name Description
Selection of
Contact Points
P1-P7
Multifunctional Input
1~7 Terminal
It can be used by setting multifunctional input.
Default values from the factory are as follows:
•
P1: Fx
•
P2: Rx
•
P3: BX
•
P4: RST
•
P5: Speed-L
•
P6: Speed-M
•
P7: Speed-H
CM Sequence Common Terminal BCommon terminal of contact point input and analog I/O terminal
Analog Input
VR
Power Terminal
for Frequency Setting
Power for analog frequency setting:
•
Max. output voltage: 12V
•
Max. output current: 12mA
•
Volume resistivity: 1~10kΩ
V1
Frequency Setting(Voltage)
Terminal
Frequency is set depending on the voltage supplied to V1 terminal.
•
Unipolar: 0~10V(Max. 12V)
•
Bipolar: -10~10V(Max. ±12V)
I2
Frequency Setting
(Current/Voltage) Terminal
Frequency is set depending on the current capacity supplied to I2
terminal. V2 can be used by selecting analog voltage/current input
terminal setting switch (SW4).
•
nput current: 0~20mA
•
Max. input current: 24mA
•I
nput resistance 249Ω
TI
Frequency Setting (Pulse Train)
Terminal
Frequency is set as 0~32kHz.
Low Level : 0~0.8V, High Level : 3.5~12V
5.5~90kW
110~500kW
A2 C2 A4 C4 Q1 EG P5 P6 P7 CM VR V1 I2 CM S+ S- SG
A1 B1 C1 A3 C3 A5 C5 24V P1 P2 P3 P4 CM TI AO1 AO2 CM
A2 C2 A4 C4 A5 C5 P5 P6 V1 I2 CM S+ S- SG P7 CM VR
A1 B1 C1 A3 C3 NC Q1 EG P3 P4 TI AO1 AO2 CM 24V P1 P2
A2 C2 A4 C4 Q1 EG P5 P6 P7 CM VR V1 I2 CM S+ S- SG
A1 B1 C1 A3 C3 A5 C5 24V P1 P2 P3 P4 CM TI AO1 AO2 CM
A2 C2 A4 C4 A5 C5 P5 P6 V1 I2 CM S+ S- SG P7 CM VR
A1 B1 C1 A3 C3 NC Q1 EG P3 P4 TI AO1 AO2 CM 24V P1 P2