Unbolt Yoke Here
Remove yoke/stirrup from lamp fixture.
•
Rotate Vulture output plates to vertical.
•
Install Vulture extension arms & 360 arms using hardware
•
provided, leave bolts slightly loose until fixture is mounted.
Mate 360 light fixture to Vulture arms, torque hardware to
•
23 ft./lb.
Mount LED power supply on the rear side of extension
•
arms.
Install customer supplied safety cables.
•
Test tilt & pan to ensure light fixture does not contact
•
Vulture or other structures.
IMPORTANT: Do not remove tilt lock bolt
DETAIL A
SCALE 1 : 3.5
Install retaining pin - 4 plcs
