LRX
VULTURE
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
13
13
Menu Options:
PRESS : “MENU”
MANAGE SETUP – Main Menu.
SET MODE / CHANNEL
To change modes – between Wired Handcontrol and Lighting Desk / Console.
SET DMX TERMINATION
To operate correctly, the last device in the DMX line should have a termination
resistor. The Vulture has this option built in. Select “SET TERMINATION” if the
unit is the last in the chain. If there are only a few units on a single DMX line, all
terminations may be set.
Using the wired LRX Hand Controller:
SELECT DATA MODE:
WIRED HAND CONTROLLER
