LRS T7450A Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 43

LRS T7450A Скачать руководство пользователя страница 35

Rechargeable Pagers

Charge Lights do not come on:

1. When placed in charger, do all pagers have a single red charge light lit up?

• If no pagers have a charge light, skip to 2.

• If only some pagers have a charge light that is lit, skip to 3

• If all pagers have the charge light lit, skip to 5.

2. You have probably blown the power supply (call Long Range Systems).

3. Please remember that only 60 Coasters, 25 Paddle pagers, 30 Lobster, or 30 Pizza Pagers can be

on one 10V-power supply. If you have more, call Long Range Systems.

4. You probably have a jumper wire that is not connected. Look on the side of your chargers and ver-

ify all wires are connected properly. If they are connected, then you may have dirty pagers con-
tacts. Using a damp rag, clean the 2 metal contacts on the back of each pager.

5. The cleaning crew may be disconnecting the pagers after hours. You may also have the pagers on

a circuit that automatically shuts off after hours. Please be sure that all pagers are plugged in and
charging when not in use.

Service Questions and Answers

Should your paging system ever fail or should you need additional paging supplies, call Long Range Sys-

tems at (800) 437-4996 (24/7 days a week)

For weekend or night emergencies:

• Long Range Systems has 24/7 live technical support available.

• Please keep in mind that options are limited over the weekend.

Long Range Systems

34

T7450A User Manual

«
...
33
34
35
36
37
...
»

Содержание T7450A












































Отзывы:

Нет отзывов