LRS T7450A Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 43

LRS T7450A Скачать руководство пользователя страница 23

Maintenance Functions

The following features are not normally adjusted unless directed by LRS.

User’s Access Code

Many of the functions that adjust paging preferences are protected by an access code.

• To reduce tampering with critical settings the keypad is password protected

• The access code 5 6 7 8 9 allows you to enter many of the restricted programming screens.

• In some cases additional access codes may be required that can be obtained from LRS.

Set the System Time/Date

Time on Alpha and Numeric pagers may be reset each time batteries are replaced. The time/date may be
reset at the individual pagers, but all pagers in use may be synchronized to the transmitter. The following
prepares time/date information to send to these pagers.

Set the Date

Set the Time and Date

1. Press SETUP to enable the function menu.

2. Press MORE (F1) to find 3:Set Time/Date.

3. Select 3: Set Time/Date.

4. Press Set (F1).

5. Enter the time in hours and minutes.

6. Press Enter.

7. Press F1 (for AM) or F2 (for PM).

8. Enter date in MO/DA/YR (e.g. May 21, 2009 = 05/21/09).

9. Press Enter.

Send the Time and Date to a Pager

1. Be sure the Alpha or Numeric pagers are in operation.

2. Press SETUP to enable the function menu.

3. Press F1 (More) until the unit shows 3: Set Time/Date.

4. Press 3 to select Set Time/Date.

5. Set the time and date (if necessary – see above)

6. Press the number 1 (Send to Pager) and the pagers will update.

Review System Status

The system status is used to review the operational program settings in the unit.

To review the settings:

1. Press SETUP to enable the function menu.

Long Range Systems

22

T7450A User Manual

«
...
21
22
23
24
25
...
»

Содержание T7450A












































Отзывы:

Нет отзывов