LRS T7450A Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 43

LRS T7450A Скачать руководство пользователя страница 25

Long Range Systems

24

T7450A User Manual

ID Finder

If your transmitter does not page Any of your pagers, it may be set for the wrong restaurant ID. If this is the
case the transmitter can detect your restaurant ID and automatically reset the ID. To find the correct ID:

1. Remove 2 or 3 pagers or coasters from the charger or turn on some battery-powered pagers.

2. Press Setup.

3. Press “MORE” (F1) until asked for the authorization code.

4. Now type 5-6-7-8-9.

5. Press the MORE (F1) key the display shows 1: ID Finder.

6. Press the “1” key.

7. Press Begin (F1) and the unit will search all ID = 0 codes.

8. When it has paged all of the codes it asks, “Did Your Pager Work?”

• If your pagers paged, press YES (F1) and the unit will be set to this ID.

• If your pagers didn’t page, press NO (F4) and the unit will try the next ID.

Setting Restaurant ID

The system ID is used to prevent interference when more than one paging system is in use in a small geo-
graphical area:

• The transmitter must be set to the new ID.

• The pagers/coasters must be converted to the new ID. An authorization code must be acquired

from LRS.

Determine the ID that is necessary, then:

1. Press Setup.

2. Press “MORE” (F1) until you are asked for the authorization code.

3. Now type 5-6-7-8-9.

4. Press the MORE (F1) key the display shows 2: Set Rest. ID#.

5. Press the “2” key.

6. When the display shows Rest ID = X (X is 0, 1, 2,….etc.), press the desired number.

7. Press the Enter key.

8. When Finished, Press OK (F1).

9. After the transmitter ID is changed, program the individual pagers to match.

Messaging Mode

Normal Mode

This mode is default for the transmitter.

Message Only Mode

This feature allows the user to set a precanned message as a default message when paging alphanumeric
pagers.

To turn Message Only Mode ON:

1. Press SETUP

2. Press “MORE” (F1) until asked for the authorization code.

3. Type 5-6-7-8-9

«
...
23
24
25
26
27
...
»

Содержание T7450A












































Отзывы:

Нет отзывов