LPKF ProtoMat 93s Manual
31
6 Tools and accessories
6.1 Tools
The tools for the LPKF ProtoMat 93s come in two different lengths. Tools used to
machine the material surface (milling and engraving) are 30 mm long for 3 mm
collets or 1.42 inch long for 1/8 inch collets, and tools used for drilling or contour
milling are 32 mm long for 3 mm collets or 1.5 inch long for 1/8 inch collets. The
following tools are available.
.
1
4
5
6
7
8
2
3
9
LPKF tools for circuit board plotters
1. Universal LPKF milling cutter and drill, for milling isolation channels and for
front panel engraving from 0.2 to 0.5 mm (depending on depth set), 30 mm and
1.42 inch long
2. LPKF Micro-cutter, for milling isolation channels of 0.1 - 0.2mm (depending on
the depth setting ), length 30mm
3. LPKF HF-cutter, produces rectangular isolation channels of 0.25mm width.
4. Film milling cutter, 0.3 mm, for making typons, 30 mm long. This tool is not
available for 1/8 inch collets.
5. Contour miller for engraving wider isolation channels.
6. Double chamfered cutter (0.8; 1; 2 mm) for front panel engraving, 30 mm long.
7. Spiral drill, various diameters for drilling in PCB material, 32 mm long.
8. Contour milling cutter, for milling out gaps in PCB material, 32 mm long.
9. Double-edged cutter (0.8; 1; 2 mm ) for milling of open spaces on aluminum,
length 32 mm.
