manualshive.com logo in svg

Lowrance M52 S/GPS, Инструкция по установке и эксплуатации

Lowrance M52 S/GPS - устройство с GPS, предоставляющее точное местоположение. Для установки и работы необходимо ознакомиться с руководством по эксплуатации и установке. Скачайте бесплатное руководство с инструкциями по установке и эксплуатации с нашего сайта manualshive.com.

Поделиться
Скачать
background image

134

DATABASES LIMITED WARRANTY

"We", "our", or "us" refers to Lowrance Electronics, Inc., the manufacturer of
this product. "You" or "your" refers to the first person who purchases the prod-
uct as a consumer item for personal, family, or household use. The Databases
Limited Warranty applies to the one or more databases that your product may
contain. We refer to each of these as a "Database" or together as the "Data-
bases." Your product may thus include the "WBS Database" which contains
worldwide background surface mapping data, the "SmartMap Database" which
contains inland mapping data, or other Databases.

We warrant to you that we have accurately compiled, processed, and repro-
duced the portions of the source material on which the Databases are based.
However, we are under no obligation to provide updates to the Databases, and
the data contained in the Databases may be incomplete when compared to the
source material. WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND ABOUT THE ACCURACY OF THE SOURCE MATERIAL ITSELF,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

If there is a defect in any Database, your exclusive remedy shall be, at our op-
tion, either a refund of the price you paid for the product containing the defec-
tive Database or a replacement of such product. WE WILL NOT UNDER ANY
CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSE-
QUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND.

Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, so the above limitations or exclusions may not apply to you.

This warranty does NOT apply in the following circumstances: (1) when the
product has been serviced or repaired by anyone other than us; (2) when the
product has been connected, installed, combined, altered, adjusted, or handled
in a manner other than according to the instructions furnished with the prod-
uct; (3) when any serial number has been effaced, altered, or removed; or (4)
when any defect, problem, loss, or damage has resulted from any accident, mis-
use, negligence, or carelessness, or from any failure to provide reasonable and
necessary maintenance in accordance with the instructions of the owner’s man-
ual for the product.

We reserve the right to make changes or improvements in our products from
time to time without incurring the obligation to install such improvements or
changes on equipment or items previously manufactured.

This warranty gives you specific legal rights and you may also have other rights
which may vary from state to state.

Your remedies under this warranty will be available so long as you can show in
a reasonable manner that the defect occurred within one (1) year from the date
of your original purchase, and we must receive your warranty claim no later
than 30 days after such 1-year period expires. Your claim must be substanti-
ated by a dated sales receipt or sales slip.

Содержание M52 S/GPS

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для M52 S/GPS

Xirgo XT2500 Product Manual preview
XT2500
Бренд: Xirgo Страницы: 92
MICODUS MV901 User Manual preview
MV901
Бренд: MICODUS Страницы: 12
Garmin nuvi 880 Quick Start Manual preview
nuvi 880
Бренд: Garmin Страницы: 118
Cetrek Chartnav 343 User Manual preview
Chartnav 343
Бренд: Cetrek Страницы: 88
Jensen NL400W Specifications preview
NL400W
Бренд: Jensen Страницы: 2
LIGHTNING GPS 4G Micro Quick Start Manual preview
4G Micro
Бренд: LIGHTNING GPS Страницы: 2
Mopar Navus Owner'S Manual preview
Navus
Бренд: Mopar Страницы: 76
Chinavision CVUK-TR32 User Manual preview
CVUK-TR32
Бренд: Chinavision Страницы: 14
ARTEX ELT 345 Description, Operation, Installation And Maintenance Manual preview
ELT 345
Бренд: ARTEX Страницы: 58
Garmin GPS 155 Repair Manual preview
GPS 155
Бренд: Garmin Страницы: 35
PATCHWORK BlackBox 510 Operating Instructions Manual preview
BlackBox 510
Бренд: PATCHWORK Страницы: 60
Teltonika FM1010 User Manual preview
FM1010
Бренд: Teltonika Страницы: 70
RoyalTek GPS SPEED CAMERA WARNING DEVICE RCD-1000 User Manual preview
GPS SPEED CAMERA WARNING DEVICE RCD-1000
Бренд: RoyalTek Страницы: 18
RoyalTek RSA-1500 RSA-1500L User Manual preview
RSA-1500 RSA-1500L
Бренд: RoyalTek Страницы: 18
RoyalTek RGM-3600 Operation Manual preview
RGM-3600
Бренд: RoyalTek Страницы: 22
RoyalTek REB-1722 Series Operational Manual preview
REB-1722 Series
Бренд: RoyalTek Страницы: 24
SEQUANS Monarch Go-GPS BLE Hardware Integration Manual preview
Monarch Go-GPS BLE
Бренд: SEQUANS Страницы: 28
RoyalTek RFG-1000 User Manual preview
RFG-1000
Бренд: RoyalTek Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды