manualshive.com logo in svg

Lowrance M52 S/GPS, Инструкция по установке и эксплуатации

Lowrance M52 S/GPS - устройство с GPS, предоставляющее точное местоположение. Для установки и работы необходимо ознакомиться с руководством по эксплуатации и установке. Скачайте бесплатное руководство с инструкциями по установке и эксплуатации с нашего сайта manualshive.com.

Поделиться
Скачать
background image

iv

Plotter Auto Zoom ..................................................................... 114
Plotter Orientation ................................................................... 115
Overlay Data ............................................................................. 115

To Select Data for Display: ............................................... 116
To Turn Off Displayed Data: ............................................ 116
To Change Displayed Data Font Size: ............................. 117

Pop-Up Help .............................................................................. 118
Position Pinning........................................................................ 118
Reset Options ............................................................................ 119
Screen Contrast and Brightness .............................................. 119
Set Language ............................................................................ 120
Set Local Time .......................................................................... 120
Show WAAS Alarm................................................................... 121
Software Version Information.................................................. 121
Sounds and Alarm Sound Styles.............................................. 122
Track Smoothing....................................................................... 123
Trail Options ............................................................................. 123

Delete All Trails .................................................................... 124
Update Trail Option.............................................................. 124
Delete Trail ........................................................................... 125
New Trail............................................................................... 125
Trail Visible/Invisible and Other Trail Options .................. 126

Units of Measure....................................................................... 126

Sec. 8: Supplemental Material ............................................ 127
FCC Compliance .................................................................... 127
Index......................................................................................... 129

WARNING!

A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD
TO OBTAIN POSITION INFORMATION.

CAUTION

When showing navigation data to a position (waypoint), a GPS unit will show
the shortest, most direct path to the waypoint. It provides navigation data to the
waypoint regardless of obstructions. Therefore, the prudent navigator will not
only take advantage of all available navigation tools when traveling to a way-
point, but will also visually check to make sure a clear, safe path to the waypoint
is always available.

WARNING!

When a GPS unit is used in a vehicle, the vehicle operator is solely re-
sponsible for operating the vehicle in a safe manner. Vehicle operators
must maintain full surveillance of all pertinent driving, boating or fly-
ing conditions at all times. An accident or collision resulting in damage
to property, personal injury or death could occur if the operator of a
GPS-equipped vehicle fails to pay full attention to travel conditions and
vehicle operation while the vehicle is in motion.

Содержание M52 S/GPS

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для M52 S/GPS

Navigon 2100 Supplementary Manual preview
2100
Бренд: Navigon Страницы: 2
Queclink GV320 User Manual preview
GV320
Бренд: Queclink Страницы: 21
WayteQ G5 Series User Manual preview
G5 Series
Бренд: WayteQ Страницы: 4
Carscop CCTR-831 Using Manual preview
CCTR-831
Бренд: Carscop Страницы: 11
Rope M528G User Manual preview
M528G
Бренд: Rope Страницы: 12
Garmin A02740 Quick Start Manual preview
A02740
Бренд: Garmin Страницы: 8
Prestigio GV4050 Manual preview
GV4050
Бренд: Prestigio Страницы: 12
SkyGuard OBU EASY Instructions For Use Manual preview
OBU EASY
Бренд: SkyGuard Страницы: 6
Naviset GT-20 PRO User Manual preview
GT-20 PRO
Бренд: Naviset Страницы: 39
WANWAY TECH G19S User Manual preview
G19S
Бренд: WANWAY TECH Страницы: 10
RUPTELA FM-Pro4 User Manual preview
FM-Pro4
Бренд: RUPTELA Страницы: 42
Navico MX420 Installation & Service Manual preview
MX420
Бренд: Navico Страницы: 80
Emerson GD300M User Manual preview
GD300M
Бренд: Emerson Страницы: 12
Emerson GO Real-Time 4G/5G Global User Manual preview
GO Real-Time 4G/5G Global
Бренд: Emerson Страницы: 19
12trace GeoChaser Control Manual preview
GeoChaser Control
Бренд: 12trace Страницы: 9
Humminbird 363 Operation Manual preview
363
Бренд: Humminbird Страницы: 57
Humminbird 786ci Operation Manual preview
786ci
Бренд: Humminbird Страницы: 138
Garmin GPS 155 Repair Manual preview
GPS 155
Бренд: Garmin Страницы: 35

Бренды по названию

Популярные бренды

Загрузить еще бренды