manualshive.com logo in svg

Lowrance GlobalMap 6500C, Руководство по эксплуатации, Страница: 98 / 144

Поделиться
Скачать
Lowrance GlobalMap 6500C Скачать руководство пользователя страница 98

90

To view Tidal Current information:

1. Use the arrow keys to move the cursor over a Tidal Current Station
icon. When selected, a pop-up name box appears.

2. Press 

WPT

 to display the Tidal Current Information screen.

Navionics chart showing Tidal Current Station icon selected by cur-

sor. In this example, the tidal current is in flood but it's about to enter

the slack water stage. The current is flowing to the west at 0.1 mph.

  

Current Information screen.

The Tidal Current Information screen displays daily tidal current data
for the station at the present time. The graph at the top of the example
above is an approximate view of the flood and ebb pattern from mid-
night (MN), to noon (NN) to midnight (MN). The velocity scale at the
top left side of the graph changes dynamically based upon the maxi-
mum velocity of the current for that day.

Cursor lines

Tidal Cur-
rent
Station icon
in animated
mode

Pop-up
name box

Содержание GlobalMap 6500C

















































































































































Отзывы:

Нет отзывов