manualshive.com logo in svg

Lovato ADXL 0030 600, Инструкция по эксплуатации

Поделиться
Скачать
Lovato ADXL 0030 600 Скачать руководство пользователя страница 9

 

 

         Doc: I456GB06_16.docx                                       29/06/2016

 

p. 9 / 20

 

 

 

IR programming port 

 

The ADXL's parameters can be configured via the front optical port, using the IR-USB CX01 programming adapter or the IR-WiFi CX02 adapter.  

 

Simply approach a CX.. adapter to the front port and insert the plugs in the specific holds to obtain the mutual recognition of the devices as indicated by the green LINK LEDs on the 

programming adapter.

 

 

Both adapters can be used in combination with the 

Lovato Electric SAM1

 App or with the 

Xpress

 remote control and configuration software.

 

        

 

USB CX01 / WiFi CX02 adapters

 

 
Parameter setting from PC  

 

The 

Lovato Electric Xpress

 remote control and configuration software can be used to transfer the set-up parameters (previously set) from the ADXL... to the PC's hard disk and vice versa. 

 

The connection can be made via the front optical port (with USB adapter CX01 or WiFi adapter CX02) or using the optional RS-485 port. 

 

Xpress

 displays values, alarms, events, the execution of commands and above all gives access to the setup menu options. 

 

 

 
Parameter setting from smartphone or tablet with CX02 Wi-Fi dongle 

 

You can use the 

Lovato Electric

 

SAM1

 App, available for tablet and smartphone (Android or iOS) and the CX02 Wi-Fi adapter to connect to the ADXL... via its front optical port. 

 

The App can be used to view alarms, send controls, read measurements, set parameters, download events and send collected data via e-mail.

 

 

       

 

 
Parameter setting from smartphone or tablet with NFC 

 

You can use the 

Lovato Electric

 

NFC A

pp, available for Android tablets and smartphones, to program the parameters in a simple, intuitive manner, without the need for cables, and even 

with the ADXL... powered off. 

 

Simply place the smart device against the ADXL...'s front panel to transfer the programmed parameters.

 

 

Conditions for operation:

 

1-

 

The smart device must have the NFC function activated and must be unlocked (active).

 

2-

 

The ADXL..., if it is powered on, must have the motor switched off.

 

3-

 

If you have set an advanced password (see parameter P03.03), it must be known, otherwise access will not be possible.

 

4-

 

We recommend having the app already loaded into your smart device. If it is not, you can still go to the 
next step, you will be automatically guided to the installation site on the online store.

 

5-

 

Place the smart device against the ADXL...'s front panel, more or less as shown in the figure 
and hold it in position (for a few seconds) until it beeps. The app will launch automatically and the parameters will be loaded and displayed. 

6-

 

Access to the parameters menu and editing are just the same as for the other apps we have considered previously.

 

 

Once you have made the modification, press 

Send 

and place the smartdevice against the ADXL....'s front panel once more. The parameters will be transferred and activated after the 

ADXL.... is reset. This is confirmed by the NFC wording on the ADXL....'s display.

 

 

Содержание ADXL 0030 600





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды