Lotus cooker PMK G Series, Инструкция по установке, обслуживанию и эксплуатации

Страница: 56 / 180

Instruction manual for installation, maintenance and use
Gas Kettles PMK.G...
PMK.G-GB-07
Page
20 di 36
3.2.2. SWITCH ON, START OF COOKING AND SWITCH
OFF
−
The appliance is equipped with a selector to start all cooking operations (see figure
“Cotrols”).
−
Here is a list of the procedures for a safe and correct use of the appliance.
Lighting the pilot burner:
−
Open the gas cock before the appliance.
−
Turn the knob from position “ Ɂ
Ɂ Ɂ
Ɂ ” leftwards to the position “ ᗄ
ᗄ ᗄ
ᗄ ”, press the knob and
together press the piezoelectric ignition button repeatedly..
−
Once the pilot flame is on, keep the knob pressed for a few seconds until the
thermocouple heats up.
Starting cooking – igniting main burner:
−
Turn the knob leftwards to the position “ “or until minimum position “ ” to light the
burner.
−
Generally cooking is started by setting the knob on the maximum heating position and
once the vat has reached cooking temperature, the knob is turned to the minimum position
to maintain the cooking temperature.
End of cooking – turning off main burner and pilot burner:
−
Turn the knob rightwards until position “
Ɂ
Ɂ Ɂ
Ɂ
” to turn off the main burner; only the pilot
flame will be lighted. Turn the knob again until position “ ᗄ ᗄ ᗄ ᗄ ” to turn off the pilot burner.
(See also figure “Controls”).
3.3. CLEANING AND CARE OF THE APPLIANCE
−
Do not use aggressive substances or abrasive detergents when cleaning the stainless
steel components.
−
Avoid using metal pads of the steel parts as they may cause rust. For the same reason
avoid contact with materials containing iron.
−
Do not use sandpaper or abrasive paper for cleaning; in special cases use a powder
pumice stone.
−
In case of particularly resistant dirt, it is advisable to use abrasive sponges (e.g.
Scotch-Brite).
−
It is advisable to clean the appliance only once it has cooled down.