Lorex LW2702 series, Инструкция по эксплуатации

Страница: 31 / 72

Recording
27
Manual Recording
Manual Recording allows you to manually start/stop recording from
one channel at a time
. You
cannot record while in Quad mode.
You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 52.
NOTE : You cannot change channels or enable Auto Sequence Viewing Mode during Manual
Recording.
To enable Manual Recording:
1. Select a channel (1~4) on the wireless receiver or from the remote control.
2. Press the Record— button .
3. To stop Manual Recording, press the Record—
button again. “NEW” will appear on the LCD
receiver indicating a new file is on the SD card.
When Should I Use Manual Recording?
•
Emergency recording
•
Low traffic environments
Figure 7.0 Recording indicated by the OSD
C C a a m m 1 1
R R E E C C
160602-1.AVI
2009 07 17
16:32:05