Connecting the LCD Receiver
15
3.
Connect the cable from the
power adapter
to the
5V
DC port
on the bottom panel of the
receiver, and then plug in the power adapter to an outlet or surge protector.
4.
Place the receiver in a location that will have a clear reception to your camera*. Rotate the
tabletop stand to help position the LCD receiver to your liking.
5.
OPTIONAL
: Connect the included AV cable to AV OUT port on the system for viewing on a TV,
VCR, or Monitor.
NOTE
: When using AV Out, the LCD screen will be blacked out—the image will only appear on the
TV, VCR, or Monitor.
6.
Slide the
power switch
on the rear panel to the “
ON
” position.
7.
Adjust the antenna on the receiver as necessary to provide the clearest reception.
*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal
structures. This will reduce the range of transmission.
POWER
ADAPTER
Figure 3.3 Power on the
LCD receiver.
Figure 3.2 Connect the 5V AC adapter.
Figure 3.4 Position the receiver and adjust the antenna
Содержание LW2702 series
Страница 71: ......
