Lorex LHV16212, Инструкция по эксплуатации, Страница: 165 / 176

Connecting a PTZ Camera (LHV2000 Series) 21
10. Auto scan : Click to run the selected autoscan.
11. Aux : Click to open the aux menu, where you can set up Presets, Tours, Patterns, and
Auto Scans.
21.2.1 Presets
Presets will save a camera position for quick retrieval.
To add presets:
1. Click to open the aux menu.
2. Click the Preset tab.
3. Enter the number of the preset you want to create under Preset .
4. Move the camera to the desired position and click Set .
To go to a preset:
• Under No. , select the number of the preset you would like to go to and click .
21.2.2 Tours
Tours will cycle through a set of presets.
To create a tour:
1. Click to open the aux menu.
2. Click the Tour tab.
3. Under Patrol No. , select the tour you would like to configure.
4. Under Preset , select a preset you would like to add to the tour.
5. Click Add Preset .
6. Repeat steps 4 and 5 to add additional presets to the tour.
NOTE
Click Del Tour to clear all presets from a tour.
To run a tour:
• Under No. , select the number of the tour you would like to go to and click .
#LX400060; r.30328/35049; en-US 155