
Chapter 9 IP Routing with Network Address Translation
45
Set the WAN 1 Layer 2 protocol. Key in the command
set wan 1 protocol
followed by your protocol
choice:
ppp
(Point to Point) or
HDLC
(High Level Data Link Control). Then press the Enter key.
In our sample setup we chose to use High Level Data Link Control protocol so we keyed in the admin
command
set wan 1 protocol hdlc
and then pressed the Enter key.
Set the WAN1 IP and MASK. Key in the admin command
set wan 1 ip
followed by the LAN1 IP address
and MASK. Then press the Enter key. In the sample screen below we keyed in
set wan 1 ip
100.2.254.254 255.255.0.0
and then pressed the Enter key.
Set the WAN 1 timeslot. Key in the command
add timeslot wan1
followed by the timeslots you wish to
add. Then press the Enter key.
In our sample setup we chose to add timeslots 1-31 so we keyed in the admin command
add timeslot wan1 1 31
and then pressed the Enter key.
Содержание IP6610
Страница 2: ...2011 Loop Telecommunication International Inc All rights reserved Version 33 23 MAR 2011...
Страница 76: ...Chapter 11 Port Forwarding Virtual Service 53...
Страница 79: ...Chapter 12 QoS 56 Figure 12 1 QoS Application...
Страница 119: ...Chapter 20 Setting Up Firmware Configuration Up Download with TFTP Server 96...