9
10
Flow
:
2.043mL/min
Pause T.
：
1.0
"
Pause Time
：
1.1
"
Flowrate
Dispensing
Test T.
：
0.5 ’
Cal
Vol
：
132.3
μ
L
Run Time
：
30
"
Act.
Vol
：
132.3
μ
L
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
Flow
:
2.043mL/min
Pause T.
：
1.0
"
Flow
:
2.043mL/min
Pause T.
：
1.0
"
Test T.
：
0.5 ’
Cal
Vol
：
132.3
μ
L
Test T.
：
0.5 ’
Cal
Vol
：
132.3
μ
L
Test T.
：
30
"
Cal
Vol
：
133.0
μ
L
Flow rates: Adjusting the dispensing flow rates can change the dispensing time.
Press and turn
Knob
to highlight dispensing flow rates line. Press
Knob
to enter
next inter face, turn
Knob
to select suitable flow rates, press
Knob
for
confirmation. Press
Exit Key
to return to previous menu.
Press
Knob
Pause Time: Time Interval between every dispensing operation.
Press and turn
Knob
to highlight pause time line. Press
Knob
to enter next
inter face. Turn
Knob
to select pause time, press
Knob
for confirmation. Press
Exit Key
to return to previous menu.
Calibration
Pump should be calibrated when flow rates or dispense volume is beyond the
tolerance. Flow rates and dispensing volume can be calibrated separately in
different applications.
Flow Rates Calibration
Press and turn
Knob
to highlight calibration line. Press
Knob
to enter next
inter face. Turn
Knob
to select Flowrate. Press
Knob
to highlight test time line.
Press
Knob
again to highlight the value of time. Turn
Knob
to select test time
(its range is from 30 to 1800 seconds), press
Knob
for confirmation. Press
Exit Key
to return to previous menu.
Press
Start/Stop Key
, the LCD displays running time and actual volume.
Running time counts down.
Turn
Knob
to input actual test volume. Press
Knob
for confirmation. The
calibration operation can be repeated.
Turn Knob to input
Actual Volume
If the actual volume is known in advance, enter the calibration inter face and
input the actual volume directly.
Disp Vol
：
2.02mL
Disp T.
：
60.5"
Disp T.
：
60.5
"
Act
Vol
：
2.020 mL
Act
Vol
：
2.02 mL
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
Flowrate
Dispensing
Test T.
：
0.5 ’
Cal
Vol
：
132.3
μ
L
Test T.
：
0.5 ’
Cal
Vol
：
132.3
μ
L
Act
Vol
：
133.0
μ
L
Flowrate
Dispensing
Disp T.
：
60.5
"
Act
Vol
：
2.040 mL
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
Flowrate
Dispensing
Disp Vol
：
2.02mL
Disp T.
：
60.5"
If the actual volume is known in advance, enter the calibration inter face and
input the actual volume directly.
Turn
Knob
to input
Actual Volume
Dispensing Volume Calibration
The parameters can not be changed under dispensing volume calibration
operation. The defaulted parameters are the parameters set under Dispensing
Setting.
Pump stops under dispense mode, press and turn
Knob
to highlight calibration
line. Press
Knob
to enter next inter face. Turn
Knob
to select Dispense.
Press
Start/Stop
Key
, the LCD displays running time and actual volume.
Running time counts down.
Turn
Knob
to input actual volume. Press
Knob
for confirmation.
Turn
Knob
to input
actual volume
Turn
Knob
to input
actual volume
WT600-1F OPERATING MANUAL
WT600-1F OPERATING MANUAL
