7
8
4.Footswitch
：
G
5.Back rpm
：
1
.
2
"
Footswitch
：
Gated
Trigger
Back rpm
：
1.2
"
1.System Setting
2.Control Mode
1.System Setting
2.Control Mode
4.Footswitch
：
G
5.Back rpm
：
1
.
2
"
Footswitch Setting
Footswitch has two kinds of working modes.
Trigger:
Press footswitch, the pump star ts running; Press footswitch again,
the pump stops.
Gated:
The pump runs as long as the footswitch is pressed.
Set Footswitch
Press and turn
Knob
to highlight the footswitch line. Press
Knob
to enter next
inter face, turn
Knob
to select Trigger or Gated, press
Knob
for confirmation.
Press
Exit Key
to return to previous menu.
The pump identifies the Longer Footswitch automatically. When the pump
connects the footswitch, the Star t/Stop Key on operating panel is invalid no
matter the external control setting is on or off.
Press and turn
Knob
Press and turn
Knob
Back suction rpm (revolutions per minute) Setting
In dispensing and filling state, to prevent the liquids from dropping to cause
error when the filling pauses, the pump will back-turn to suck back the liquids.
The back turn angle is the same for each filling operations, it doesn't influence
the filling accuracy.
Set back suction rpm:
Press and turn
Knob
to highlight the back suction rpm line. Press
Knob
to enter
next inter face, turn
Knob
to select back suction rpm, press
Knob
for
confirmation. Press
Exit Key
to return to previous menu.
Flowrate
Dispensing
Disp Vol
:
2.02mL
Copy No.
：
10
Disp Vol
：
2.02 mL
Copy No.
：
10
1.System Setting
2.Control Mode
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
1.System Setting
2.Control Mode
3.Disp Setting
4.Calibration
Disp Vol
:
2.02mL
Copy No.
：
10
Control Mode
The pump has two kinds of working mode: Flow Rates and Dispensing.
Set Control Mode:
Press and turn the
knob
to highlight control mode line. Press
Knob
to enter next
inter face, turn
Knob
to select control mode, press
Knob
for confirmation. Press
Exit Key
to return to previous menu.
Dispensing Setting
Before dispensing process, the parameters including pump head, tubing, back
suction rpm, dispensing volume, copy number, flow rates, pause time, etc. must
be set.
Dispensing Volume: the volume that the pump dispenses between every time
interval.
Press and turn
Knob
to highlight dispensing setting line. Press
Knob
to highlight
dispensing volume line. Press
Knob
again to highlight the value of the volume.
Turn
Knob
to select dispensing volume, press
Knob
for confirmation. Press
Exit
Key
to return to previous menu.
Copy No.: the total filling number in dispensing mode. Its range is from 0 to 9999.
Press and turn
Knob
to highlight copy number line. Press
Knob
to enter next
inter face. Turn
Knob
to select copy number, press
Knob
for confirmation. Press
Exit Key
to return to previous menu.
If the copy no. is “0”, the dispensing process of the pump will continue until
press
Start/Stop Key
or shut off the pump to stop dispensing.
WT600-1F OPERATING MANUAL
WT600-1F OPERATING MANUAL
