London Electronics INTUITIVE INT2 Series, Детали подключения, масштабирование и общая информация

Страница: 6 / 36

6
General Description
The INT2 Series of meters accept industrial sensors to allow various physical
measurements to be made, such a weight, temperature, pressure, humidity
etc. Different models are available for different sensor types.
The main function of the INT2 series is to give a numeric readout of the variable
being monitored. Most models include an excitation power output, to power
the sensor directly.
Various optional output modules are also available to give alarm relay outputs,
analogue output or digital communications, or any combination of these options.
Meters are programmed using front panel pushbuttons. The buttons may be
locked with a rear switch.
Meters have two power supply options : 100-240 VAC or 11-30VDC
The INT2 series of meters are designed to mount into a protective enclosure
which will protect users from contact with power and signal wiring.
These units must be installed fully assembled, and must be installed according
to local electrical installation rules.
Safety
Obey all safety warnings in this manual, and install the meter according to local
wiring and installation regulations. Failure to follow these guidelines may cause
damage to the meter, connected equipment, or may be harmful to personnel.
Any moving mechanical device controlled by this equipment must have suitable
access guards to prevent injury to personnel if the meter should fail.
!
Caution: There is a risk of electrical
shock if this instrument is not properly installed
Caution: Risk of danger: Read the whole
manual before you install this meter