London Electronics INTUITIVE INT2 Series, Детали подключения, масштабирование и общая информация

Страница: 31 / 36

31
Equipment Specifications
Bezel size 48mm high by 96 mm wide (1/8 DIN)
Panel Cutout 45 mm high by 92 mm wide
Case Depth 125 mm including connectors
Weight 300 grammes
Case Material Black polycarbonate
Connectors Detachable Screw Terminal connectors
Environmental Storage Temperature range -20 to +70C, non condensing
Operating temperature range 0 to 50C, non condensing
Front sealed IP65.
Power 100-240 VAC, 45 to 60Hz or 11-30 VDC optional
Burden 10VA maximum
Input Signals (4x) Contact closures, with debounce
NPN and PNP proximity sensors (47kilohm pullup/down)
24V logic pulses from PLCs
AC tachometer inputs
100mV passive Inductance pickup (on Input 1 only)
Frequency Range 0-40,000 Hz (0-100,000Hz on Rate only)
Accuracy +/-0.05% of range, quartz crystal reference
Span tempco 20 ppm/Degree Celsius
Excitation voltage 24VDC nominal rated at 60mA, to power sensors
Averaging / smoothing Selectable averaging time constant of 0 to 25 seconds.
Memory Totals and settings saved in 10 year non-volatile memory.
Display update rate 3 readings per second.
Display Range (max) -199999 to 999999
Plug-In Output Options
Analogue O/P
0-10VDC 0-20mA 4-20mA
Drive capacity >1K Ohms <500 Ohms <500 Ohms
Isolation 250 VAC Optically isolated
Accuracy +/-0.1% range, +/-10mV for ANV, +/-10uA for ANI, 50ppm/C stab.
Linearity +/-0.02% of range
Resolution better than 0.2mV for 10v, 0.4uA for 20mA range
Scaling Fully adjustable, direct or inverse
Alarm Relay O/P 2 or 4 alarms SPST rated 2 Amperes at 250 VAC,
resistive load. All relays must switch power from the same phase.
Selectable normally open or normally closed by on-board
switches.
Selectable energise or de-energise on trip by menu
Independant hysteresis on each alarm relay.
ASCII Data O/P RS232 or RS485 ASCII Value of reading.
Format 1 start bit, 8 data, no parity. <Measurement><CR>
Isolation 250 VAC optically isolated