![London Electronics INTUITIVE INT2 Series Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/london-electronics/intuitive-int2-series/intuitive-int2-series_connection-details-scaling-and-general-information_1938467017.webp)
17
The analogue output board plugs onto the 0, 2 or 4 alarm upper option board.
It plugs onto a pair of connectors and is secured by two snap-pillars.
Check that the unit is set for voltage or current output, to suit your application.
Re-assemble the meter, apply power and follow the Analogue Output Settings procedure on the
next page.
You can set the analogue output to operate over a display range of your choice, to create 0-
20mA, 4-20mA or 0-10V, fully isolated.
Please see the following page for a guide how to do this.
Handy Feature
You can tell if an analogue output is fitted to your meter, and if it has been set for voltage or
current, by viewing the ‘Summary’ display.
To see this, press the two outer buttons of the display for 3 seconds. You will also see the
summary when you first switch on your meter.
AL1
AL2
AL3
AL4
Serial Data
Comms Option
Analogue
Output
Option
Current
0-20mA & 4-20mA
Voltage
0-10V
Warning:
Disconnect all cables from
option board before adjusting
Analogue Output - page 1
Where the product is intended for “UL” installations
removal or addition of option boards is not permitted.
!
Warning:
Disconnect
all power before exposing
the rear of the meter
Содержание INTUITIVE INT2 Series
Страница 2: ...2...
Страница 29: ...29 Notes...
Страница 34: ...34 Notes...
Страница 35: ...35 Notes...