Lombardini LDW 422 SERIES, Руководство по ремонту

Страница: 58 / 126

5 8
18-10-2004
18-10-2004
00
REG. CODE
1-5302-662
MODEL N°
51092
DATE OF ISSUE
REVISION
DATE ENDORSED
COMPILER TECO/ATI
XI
161 162 163
160
164 165 166
167
B
A
C
13
D
E
6
7
4
F
G
10
13
DISASSEMBLY/REASSEMBLY
1) Shaft
2) Cup
3) Idling speed governor spring
4) Rod control lever
5) Throttle control
6) Pump connection rod
7) Pin
8) Centrifugal weights
9) Weight container
10) Maximum RPM governor spring
11) Delivery control screw
12) Adjustment spring container
13) Adjustment lever
14) Magnet
Delivery regulator
- Disassembly
Remove the cover by way of the 6 retaining screws (Fig. 160).Remove retainer A
(Fig. 161), cap B and idling spring C (Fig. 162).Set adjustment lever 13 (Fig. 162)
towards the outside, extract supplementary spring D, extract retainer E and
remove pump control rod 6 (Fig. 163).
Remove the snap ring (fig. 164), extract pin 7 (fig. 165), disassemble the adjustment lever 13 and rod control lever 4 (Fig. 164),
spacers F (Fig. 165) and shim washers G (Fig. 166) which are located between the two levers 13; when assembling follow the
correct sequence.