Lombardini LDW 422 SERIES, Руководство по ремонту

Страница: 53 / 126

5 3
18-10-2004 18-10-2004
00
REG. CODE
1-5302-662
MODEL N°
51092
DATE OF ISSUE
REVISION
ENDORSED COMPILER TECO/ATI DATE
XI
154 155
B A
157 158 159
156
D
E
DISASSEMBLY/REASSEMBLY
Flywheel-side housing half – Roller case, multiple gear and roller case, gear - Disassembly
Remove the two gearbox shaft roller cases by using a crop end as a punch, with an external Ø of 24 mm (Fig. 154) for the roller
case of the multiple gear “A” and with an external Ø of 36 mm for roller case of the gear shaft “B” (Fig. 155).
external
diameter
mm 36
external
diameter
mm 24
Clutch-side housing half – Gearbox shaft roller case and multiple gear ball
bearing - Disassembling.
Assemble puller 981075.415 (Fig. 156) onto the gearbox shaft roller case and work
on the central nut until the extraction is completed (Fig. 157).
Remove the snap ring “D” (Fig. 158), work on the opposite side to the one shown
in the figure and expel “E” (Fig. 159) ball bearing using a 30 mm external Ø punch.
puller 981075.415