Loma IQ3 страница 73 Скачать руководство пользователя

Страница: 73 / 144

Getting Started

■

Press an active

Menu Navigation Key

to edit the value.

If the value is a number it will increase or decrease.

If the value has alternatives such as

YES

pressing a key will cycle the value between

the alternatives.

■

Once the correct value is being displayed, press the

OK / Enter Key

to confirm the change.

Editing a Text Field

■

Press the

OK / Enter Key

to edit the first character. A blank space is displayed if there is no

existing character.

■

Use the

Menu Navigation Keys

to step through the available characters until the correct one

is displayed. Characters available are - Dots, Dashes, Underlines, Spaces, Numbers 0 to 9,
and Letters A to Z.

■

Press the

OK / Enter Key

to confirm selection of the first character and to select the second

character for editing.

■

Use the

Menu Navigation Keys

to select the second character and press the

OK / Enter

Key

to confirm its selection and to select the third character for editing.

■

Repeat the above process until all characters have been selected.

Note that you will then need to press the

OK / Enter Key

for all available characters, so if you

haven't used them all you must keep pressing the

OK / Enter Key

until the asterisk (*)

appears at the beginning of the option display to indicate that all characters have been
selected.

Electrical Services Box

When the IQ

Metal Detector head is supplied fitted to a Loma conveyor, the following switches and

buttons are also provided, mounted on the Electrical Services Box:

The

Isolator Switch

is located on the front of the Electrical Services Box and is

shown here in the

position. Power is being supplied to the machine.

The

Isolator Switch

is shown here in the OFF position. Power is NOT being supplied

to the machine.

The conveyor

Start/Stop

button is located on the front of the Electrical Services Box

and is used to start and stop the conveyor.

Pushing the green section at the top of the button starts the conveyor and the white
LED located in the middle of the button is lit to indicate this.

Pushing the red section at the bottom of the button stops the conveyor and the white
LED is extinguished.

The

Emergency Stop

button is located on the front of the Electrical Services Box

and is to be used in EMERGENCIES ONLY to stop the machine.

Содержание IQ3
















































































































































Результаты поиска

Содержание IQ3

Отзывы:

Похожие инструкции для IQ3

Бренды по названию

Популярные бренды

Loma IQ3, Руководство пользователя

Результаты поиска

Содержание IQ3

Отзывы:

Похожие инструкции для IQ3

Бренды по названию

Популярные бренды