Loma IQ3 страница 122 Скачать руководство пользователя

Страница: 122 / 144

Logs and Reports

■

Problem:

Bin full - the reject bin full sensor has been blocked for longer than 5 seconds and

the transport system has stopped. The bin will need to be emptied before the transport can be
restarted.

Action:

If the bin is full:

1. Remove, identify and segregate the product. Once the sensor is unblocked the fault
will automatically clear.

If the bin is not full:

1. Check the Bin full sensor is working correctly.

■

Problem:

Link corrupted - data corruption has occurred between the detector and LomaLink

PC or other controlling device. The operation of the detector is unaffected.

Action:

1. Check cabling and link connectors from remote device.

2. Check LomaLink PC or other controlling device for reported errors.

■

Problem:

Link failure - a break in communication between the detector and LomaLink

PC/other controlling device. The operation of the detector is unaffected.

Action:

1. Check cabling and link connectors from remote device.

2. Check connections between the detector and LomaLink PC or other controlling device
for loose or broken wiring/connectors.

■

Problem:

PV test timeout - an automated prompt for the PV test has either not been actioned

or completed within the window time set. The transport system may have stopped.

Action:

Clear system fault (restart the transport if stopped) and perform a

PV test

■

Problem:

PEC obstructed - the product registration photo-eye has remained blocked for

greater than 6 consecutive pack lengths. This fault is only generated if the PEC fault is
enabled.

Actions:

1. Check the PEC for blockage.

2. Check the PEC is working correctly.

3. Check pack flow length entry is adequate in the

Menus > Set Up > Product

menu,

ensuring an allowance is made for pack skew.

4. Ensure the correct belt speed is entered in the

Menus > Service > Configuration >

System

menu..

■

Problem:

Wrong flash c/sum - the software has compared the flash checksum currently

stored in its memory with the checksum for recently installed software. This occurs if a
software update has been done and a hardware cold start was not performed after
installation.

Action:

1. Perform an update to the Flash Checksum in the

Menus > Machine Details

menu.

112

Содержание IQ3
















































































































































Результаты поиска

Содержание IQ3

Отзывы:

Похожие инструкции для IQ3

Бренды по названию

Популярные бренды

Loma IQ3, Руководство пользователя

Результаты поиска

Содержание IQ3

Отзывы:

Похожие инструкции для IQ3

Бренды по названию

Популярные бренды