Loma IQ3, Руководство пользователя

Страница: 126 / 144

Logs and Reports
Status Report
Purpose
The Status Report contains accumulated product run data for the currently running product at the time
it is sent to assist in investigating problems with specific products and batches.
Running the Report
To run the report, navigate to the Menus > Results menu, select the Status Report? option and
press the OK / Enter Key . The report will then be generated and sent over the serial link to the
connected device.
Report Contents
The report contains information the following information:
■
Time – Displays the time that the report was generated.
■
Date – Displays the date that the report was generated.
■
Machine Identification – Displays the machine ID.
■
Product Number – Displays the product number.
■
Product name – Displays the product name.
■
Batch start time – Displays the batch start time.
■
Batch finish time – Displays the batch finish time.
■
Number of packs passed - Displays the total number of packs passed through the detector
for the batch.
■
Number of good packs - Displays the number of packs accepted.
■
Number of bad packs – Displays the number of packs rejected.
■
Maximum Signal - Displays the maximum product signal detected for the batch.
■
Average Signal All - Displays the average product signal detected for all packs passed
through the detector for the batch.
■
Average Signal Good - Displays the average product signal detected for just the number of
good packs accepted.
PV Test Report
The PV Test Report contains a record of completed in-line detector performance testing activity which
is useful for providing compliance evidence and when carrying out investigations.
Running the Report
The report is automatically created and sent over the serial link to the connected device each time a
PV test is completed.
Report Contents
The report contains some general information and a list of the options available in the Menus > Set
Up > PV Test Set Up menu with their associated values and selections.
■
Date – Displays the PV test date.
■
Time – Displays the PV test time.
■
Machine Identification - Displays the Machine ID.
■
Product Number – Displays the product number.
116