Lojer ScanAfia ICU Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 79

background image

Operating instructions

ScanAfia X TK, S, ICU Version 1.5

Copyright © Lojer Oy, 2015

49

7.16

Get-up support (70362KP)

The get-up support helps the patient to get in and out of bed. The SWL of the
get-up support is 75kg.

This get-up support can be used with the ScanAfia X hospital and treatment
beds. Make sure the support and the bed are compatible before installation.

IMPORTANT!

Make sure that the surroundings of the bed are safe. Make
sure there is adequate room around

–

and above

–

the bed.

Make sure there are no sharp corners or potentially hazardous
objects around the bed. When the bed is raised also the get-
up support moves and more space is needed.

IMPORTANT!

Never have the get-up support handle turned toward the bed.

IMPORTANT!

We recommend that the get-up support handle is removed
when the patient is asleep or the side rails are raised up.

IMPORTANT!

Never use the get-up support as an accessory replacing the
side rail (danger of crushing and falling).

IMPORTANT!

Never attach anything to the get-up support.

IMPORTANT!

Check regularly that the fastening of the get-up support
operates and is firm.

IMPORTANT!

There is a danger of crushing when using the get-up support
and the side rails.

IMPORTANT!

There is a danger of crushing when adjusting the get-up
support and the backrest.

Figure 97.

Warning label of the get-up support

If a quick mounting frame has not been installed on the bed, start installing the
get-up support with Chapter '7.15 Quick mounting frame'. The get-up support is
installed on the bed in the following order:

1. Place the quick mounting plate of the get-up support into the mounting

frame as indicated in Figure 98 so that the metal profile of the quick
mounting plate is facing the backrest. Make sure that the locking pin of
the mounting frame locks the quick mounting plate in place.

«
...
53
54
55
56
57
...
»

Содержание ScanAfia ICU
















































































Отзывы:

Нет отзывов

Похожие инструкции для ScanAfia ICU

Бренд: ABB Страницы: 36

Бренд: ABB Страницы: 40

Бренд: Dairyland Страницы: 21

Бренд: GALBIATI Страницы: 20

Бренд: Nel-Tech Labs Страницы: 8

Бренд: Nektar Страницы: 12

Бренд: T&D Страницы: 28

Бренд: H&S Страницы: 54

Бренд: Samson Страницы: 2

Бренд: Cannon Страницы: 70

Бренд: Sakai Страницы: 31

Cutler-Hammer ATC-300

Бренд: Eaton Страницы: 32

Бренд: U-Line Страницы: 6

UG 2200 Special

Бренд: Amazone Страницы: 252

Бренд: HOFFEN Страницы: 22

Бренд: KEP Страницы: 33

Ology Walkstation 1451458001

Бренд: Steelcase Страницы: 38

Бренд: PMK Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды