Operating instructions
ScanAfia X TK, S, ICU Version 1.5
Copyright © Lojer Oy, 2015
44
5. Place the bed surface extension in the frame of the leg rest so that the
holes in the extension board align with the leg rest frame (Figure 88).
Figure 87.
Attaching the bed surface extension
6. Fasten the bed surface extension with four wing screws (Figure 88).
Figure 88.
Bed surface extension fastened with wing screws
7. Place the leg rest plastic board back in place.
8. Place the bed surface extension cushion back in place.
9. Place the bed end back in place in the rear end.
Removing the bed surface extension from the bed:
1. Lock the bed wheels.
2. Remove the bed surface extension cushion.
3. Remove the plastic board of the leg rest.
4. Remove the four wing screws which fasten the bed surface extension to
the leg rest frame and remove the bed surface extension (Figure 88).
5. Remove the four thumbscrews of the rear bed end and support the rear
bed end (Figure 86).
6. Push the rear bed end toward the front of the bed until the two closest
screw holes of the rear bed end align with the holes in the bed frame.