Operating instructions
ScanAfia X TK, S, ICU Version 1.5
Copyright © Lojer Oy, 2015
29
A folding end and a high end are available as accessories to the hospital bed.
The folding end can be used as bed making aid. Tilt the end by turning the
thumbscrews at the lower edge of the end anti-clockwise one cycle, lift the end
and, holding the end by its top arc, pull the end away from the bed. When you
return the end to the upright position, make sure that the end is in place and
fasten the thumbscrews. The SWL of a folding end is 10kg.
High ends and rails are available as accessories if you are using mattresses
that are higher than usual, see Chapter 7.10 Mattress recommendations.
Figure 60.
Folding end 80cm 70358KP folded down for making the bed
Figure 61.
Labels for ends of widths 80cm and 90cm
Figure 62.
Labels for folding ends of widths 80cm and 90cm
Figure 63.
Labels for high ends of widths 80cm and 90cm
