LOHBERGER LCP 70, Руководство пользователя, Страница: 16 / 28

-- Settings --
Service code |%
reset |
>Summer/Winter < |
-- Summer/Winter --
>Winter mode <
-- Summer/Winter --
>Summer mode <
-- Main menue --
Settings
>informations <
Default setting
-- informations --
>Sensors < |
actuators |
System/SWversion |%
-- informations --
>Sensors < |
actuators |
System/SWversion |%
-- Sensors --
>Door cntact ON< |
grate contact ON |
release ON |%
-- Sensoren --
t Flame 38 |%
t Flue gas 26 |
>t Plug-in 24< |%
-- Sensors --
t Flue gas 26 |%
t Plug-in 24 |
>t Boiler 29< |
page 16
Summer/Winter
(only for appliances with central heating insert)
Select the menu SUMMER/WINTER by pressing or and press the
OK
button once (figure 38).
The setting can be changed by pressing the buttons or (figure 40/41).
Press button three times to return to the top level of the menu.
To reduce heat output in summer, the appliance can be changed from winter to
summer mode. This setting limits the upwards adjustment range of the pellet
burner.
• Boiler set-point temperature WINTER 75°C
• Boiler set-point temperature SUMMER 65°C
To reduce heat output in summer, the appliance can be changed from winter to
summer mode. This setting limits the upwards adjustment range of the pellet
burner.
• Boiler set-point temperature WINTER 75°C
• Boiler set-point temperature SUMMER 65°C
19. Menu Informations 19. Menu Informations
To enter the menu Information from the main menu, select the menu Informa-
tion by pressing the button or and press the
OK
once (figure 42).
Sensors Passive appliance components such as sensors, …
Actuators
Active appliance components such as motors, blowers, …
Appliance / SW
Version Display of the pre-set appliance type and of the installed
software version.
Operating hours Display of the total amount of operating hours as well as
how many operating hours are left until the next mainte-
nance of the appliance is due.
Sensors
Select the menu Sensors in the menu Information by pressing the button
or and press the
OK
once (figure 44)
Paging through the menu items is possible by pressing the button or
(figure 45-47).
ON /OFF (OFF = door open)
ON /OFF (OFF = grate open)
ON /OFF (OFF = no external command)
Current flame temperature
Current exhaust gas temperature
Current discharge chute temperature
Current boiler temperature – (only for appliances with central heating insert)
Press three times to return to the top level of the menu.
fig. 40
fig. 41
fig. 42
fig. 43
fig. 44
fig. 45
fig. 46
fig. 47
fig. 48