-- Settings --
automatic mode |
Heating period |
>Keylock < |%
-- Keylock --
>Keylock OFF <
-- Keylock --
>Keylock ON <
-- Settings --
Keylock |
Service code |
>reset < |%
-- reset --
reset with OK
-- Settings --
Heating period |
Keylock |
>Servicecode < |%
-- Servicecode --
>Servicecode **** <
-- Servicecode --
code wrong
page 15
Key lock (function)
Select the menu
Keylock
in the menu Settings by pressing the buttons
or
and press
OK
button once (figure 31).
The key lock function can be activated /deactivated by pressing the buttons
or
(figure 32/33).
Press
button 3 times to return to the top level of the menu.
Now the key lock can be activated or deactivated in the top level of the menu
by simultaneous pressing of the buttons
and
.
To use the key lock in the top level of the menu, the key lock function must be
activated. If the
keylock function
is switched on, the key lock will be automatically
activated after a power failure.
To use the key lock in the top level of the menu, the key lock function must be
activated. If the
keylock function
is switched on, the key lock will be automatically
activated after a power failure.
Service code
Select the menu
Servicecode
in the menu
Settings
by pressing the buttons
or
and press
OK
button once (figure 34).
Press
OK
button once, the first digit flashes.
Adjust number by pressing the buttons
or
(figure 35).
Press
OK
button once, the next digit flashes.
After entering the last digit, press the
OK
button once, when the correct
service code has been entered, the message “
cLeaNiNg cONF.
” or “
MaiN-
teNaNce cONF.
” appears in the text box.
Press the
OK
button once, the service hour meter for the maintenance
interval will be reset (resetting not visible!).
If an incorrect service code is entered, the message
cODe WrONg
appears in
the text box (figure 36).
Press
OK
button once, repeat the steps for the entry of the service code
and enter the correct service code.
Press
button twice to return to the top level of the menu
To confirm cleaning works or maintenance works that have been performed on the
appliance, a service code is to be entered. As a consequence the relevant internal
service hour meter will be reset.
•
Cleaning works are necessary after 250 operating hours and this will be
indicated in the top level of the menu by the display “APPLIANCE CLEAN-
ING”, confirmation with cleaning code
1234
•
Maintenance works are necessary after 2000 operating hours and this will
be shown in the top level of the menu by “APPLIANCE MAINTENANCE”, a
confirmation by a service technician is required.
To confirm cleaning works or maintenance works that have been performed on the
appliance, a service code is to be entered. As a consequence the relevant internal
service hour meter will be reset.
•
Cleaning works are necessary after 250 operating hours and this will be
indicated in the top level of the menu by the display “APPLIANCE CLEAN-
ING”, confirmation with cleaning code
1234
•
Maintenance works are necessary after 2000 operating hours and this will
be shown in the top level of the menu by “APPLIANCE MAINTENANCE”, a
confirmation by a service technician is required.
Reset
Select the menu
RESET
in the menu
SETTINGS
by pressing the buttons
or
and press
OK
button once (figure 37).
Press
OK
button once, a reset will be carried out (figure 38).
The display returns to the menu Settings.
Press the button
twice to return to the top level of the menu.
In case of a reset all customer specific settings such as heating times etc. will be
reset to default setting!
In case of a reset all customer specific settings such as heating times etc. will be
reset to default setting!
fig. 32
fig. 33
fig. 34
fig. 35
fig. 36
fig. 37
fig. 38
fig. 39