Logik L72PDT11E, Руководство по установке, Страница: 38 / 172

38
GB
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table contains
various tips.
Menu Description
No power. • Ensure the car power adapter is connected.
• Make sure that the unit is turned on.
• Make sure that you select ON mode.
• Make sure the battery is charged up on the DVD player.
The remote control does
not function. • Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Make sure the plastic sheet has been removed from the remote control.
• Remove any obstacles between the remote control and the unit.
• Make sure to match or pair the remote control A with the DVD Player A, and the remote
control B with the DVD Player B.
Very little or no sound is
coming from a DVD.
• Make sure the unit is not paused. Press the
PLAY/SEL.
button on the unit or the remote
control.
• Make sure the unit is not in fast-forward or fast-reverse mode. Press the
PLAY/SEL.
button
on the unit or the remote control.
• Make sure the AUDIO/VIDEO input/output connections are correct.
• This unit does not support DTS audio decoding system. Press the
AUDIO
button on
the remote control to change the audio setting to 2-Channel Analogue mode.
• The unit has overheated. Shut it off for 30 minutes to allow it to cool down.
• The volume control is too low. Increase the volume.
No picture. • The region number of the disc doesn’t match the region number of this unit.
• Make sure the
Back Light is set ON on the main unit.
The picture is not clear. • The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Please adjust the LCD’s brightness, contrast and colour using the
LCD button on the LCD
monitor or the remote control.
– Setup Video Picture Mode User.
Loud hum or noise is heard. • The plugs and sockets are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
• The disc is scratched or the file is corrupt.
The disc does not play.
• There is no disc inside the unit (“No Disc” appears on the screen).
• Insert the disc correctly with the graphics facing up.
• Clean the disc.
• A non-valid disc has been inserted, or the disc region number does not match the region
number of the unit.
• Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
• It may not be possible to play CD-R/RW or DVD-R/RW in all cases due to the type of disc or
condition of the recording. If you are having trouble playing a certain disc, remove the disc
and try a different one. Improperly formatted discs will not play on this DVD Player.
File from memory card or
Disc does not play • Check the file format.
The unit does not respond
when pressing any buttons • The unit may freeze up during use.
• Switch the unit off and then on again to reset the unit.
L72PDT11E_IB_final110307.indb 38 07/03/2011 6:07 PM