Logik L72PDT11E, Руководство по установке, Страница: 18 / 172

18
GB
A
DVD Playback
LCD panel latch Power switch
Basic DVD Playback
1. Slide the ON/OFF switch to the ON position on the DVD player A/B.
2. Slide the LCD panel latch to the right to lift up the LCD panel.
3. Press the
OPEN
button to lift up the disc tray and access the disc holder.
4. Hold the disc by its sides and carefully place onto the disc holder with the label side facing up.
Gently push the disc down until you hear a “click” sound, close the disc tray door and then lock the
unit shut.
5. The DVD player will automatically display the main menu or start playing the DVD disc.
• If the DVD player does not automatically start playing the DVD, press the PLAY/SEL. button on
the unit or the remote control.
• To play a title, press the / / / buttons on the unit or press the / / / or the
0-9
buttons on the remote control to highlight it and then press the PLAY/SEL. button on the unit or
the remote control.
Ensure that the screen protection film is removed before use.
• This instruction manual explains the basic instructions for operating this unit. Some DVDs are
produced in a manner that allows for specific or limited operation during playback. Therefore, this
unit may not respond to all operating commands.
This is not a defect
.
• Please refer to the instructions accompanying the specific DVD in question for more information
about the options available on that DVD. “ ” may appear on the screen during operation. A “ ”
means that the desired operation is not permitted by the unit or disc.
DVD Player
Right side
DVD Player
Front side
L72PDT11E_IB_final110307.indb 18 07/03/2011 6:06 PM