Logik L300GR13E, Инструкция по эксплуатации

Страница: 12 / 40

12
GB
After Use
After you have finished blending:
1. Unplug the blender from the mains socket.
2. Turn the bottle and blade assembly anti-clockwise to unlock and remove it
from the base of the blender.
3. Unscrew the blade assembly, spoon out the contents carefully or replace
with the spill-proof lid.
Cleaning and Maintenance
Ensure the blender is switched off and unplugged from the mains socket.
Cleaning the bottle and the blade assembly:
• Immediately after use, always clean the parts that have come into contact with
food, using warm soapy water and washing-up liquid.
• Wash all attachments by hand, then dry thoroughly.
• Make sure that the cutting edges of the blades do not come into contact with
hard objects. This could cause them to become blunt.
• The unit is protected so as not to operate if the bottle is not attached to
the base. Never leave the blade assembled on the base when not in use,
always store the blades in a separate location.
• Handle blades with care especially during cleaning as they are extremely
sharp.
Cleaning the base:
• Never let the motor unit, mains cable or plug get wet.
• Wipe the motor unit with a damp cloth, then dry. Do not immerse the motor
unit in water.
Specifications
Model L300GR13E
Power
220-240V~50Hz, 250 W
Capacity of Bottle
300 ml
Duty Cycle
1 minute ON, 3 minutes OFF
Features and specifications are subject to change without prior notice.
L300GR13E_IB_7L_130222_Annie.indb 12 13年2月22日 下午5:47