Logik L300GR13E, Инструкция по эксплуатации

Страница: 11 / 40

11
GB
Fitting the Blender Bottle to the Base Unit
1. Screw the blade assembly to the open end of the blender bottle.
2. Turn the bottle upside down. Align the arrow to unlock position and turn
the bottle clockwise to lock. To unlock, turn the bottle anti-clockwise. If the
bottle is not properly fitted to the base of the blender will not start.
Operation
1. Make sure the bottle and the blade assembly are secure and in the lock
position.
2. Plug your blender into the mains socket and switch on the power.
3. Press and hold the Pulse button, the blender will start blending. The blender
will continue to blend as long as the Pulse button is pressed.
4. To stop the operation, release the Pulse button.
• Do not run the blender continuously for more than 1 minutes. After a
full 1 minute cycle allow the blender to rest for another 3 minutes before
using it again.
• Never blend very hot liquids in the blender. This is dangerous as the
contents may erupt.
• If you spill liquid on the base immediately switch off and wipe dry.
• If the motor stalls turn off the blender immediately, unplug the blender
and let it cool for at least 10 minutes.
L300GR13E_IB_7L_130222_Annie.indb 11 13年2月22日 下午5:47