USER MANUAL SMARTneo //
PAGE 31
ooo
When
000
flashes on the display, a manual reset is necessary. This process is
explained in Chapter 9.4.
NOTICE
The menu has a time-out of 5 seconds, which means that the
menu is closed automatically and without saving the settings if
no entry is made within 5 seconds.
NOTICE
When the menu appears, the display shows
S and a number
,
e.g.
S 5
. The number depends on the parameters of the control.
10.10 CONTROL SYSTEM TO FACTORY SETTINGS
RESET (S0 MENU)
1
2
Simultaneously press the
memory position buttons 1, 2
and the button
Table top up
.
Hold the button combination for approx. 3 seconds. Then release the buttons.
S 5
The display shows
S and a number
, e.g.
S 5
.
Press the button
Table top up
until the display shows
S 0
.
S O
The display shows
S 0
.
SAVE
Press the
memory button
.
The control is reset to factory settings. The control is
now in the same state is during the first start-up.
NOTICE
The menu has a time-out of 5 seconds, which means that the
menu is closed automatically and without saving the settings if
no entry is made within 5 seconds.
NOTICE
When the menu appears, the display shows
S and a number
,
e.g.
S 5
. The number depends on the parameters of the control.
