08 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
PREFACE
:LWKWKH$GMXVWDEOH%HG)UDPHHYHU\HႇRUWKDVEHHQPDGHWRHQVXUH\RXUFRPIRUWDQGVDIHW\
Each Bed Frame is rigorously tested to comply with all relevant safety standards and their re-
quirements.
This Owner’s Manual is intended to enable persons to assemble and operate the Bed Frame
safely. However, incorrect installation of the product, or usage outside of the intended use de-
scribed in this Owner’s Manual may lead to hazardous situations. In Chapter 1, “Safety”, and
throughout this Owner’s Manual, potential risks, their consequences, and steps to avoid harm
are explained.
Observing the safety instructions in this Owner’s Manual will help you to avoid hazards and min-
imize damage to the system. All persons involved in the assembly of the system must have the
full product documentation available to them at all times. Product documentation consists of this
Owner’s Manual and any other relevant documents supplied by the manufacturer. Documenta-
tion must always be kept complete and legible.
2. INTRODUCTION
LIABILITY
The descriptions of product characteristics in this Owner’s Manual are not a guarantee of the
presence of these characteristics. LOGICDATA is not liable for damage or injury caused by:
ƒ
Improper product use
ƒ
Disregard of the documentation
ƒ
Unauthorized product alterations
ƒ
Improper work on and with the Adjustable Bed Frame
ƒ
Operation of damaged products
ƒ
Improperly performed repairs
ƒ
Unauthorized changes to the operating parameters
ƒ
'LVDVWHUVH[WHUQDOLQÀXHQFHDQGIRUFHPDMHXUH
/2*,&'$7$DVVXPHVQROLDELOLW\IRUWHFKQLFDORUSULQWLQJHUURUVIRUGH¿FLHQFLHVLQWKLVGRFX-
mentation, or for damages caused directly or indirectly by the delivery, performance, or usage
of this documentation.
Contact information can be found on page 2 of the Owner's Manual.
Visit www.adjustables.logicdata.net/customer-care for a full list of customer support
options.
09
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
FCC STATEMENT
The Radio Frequency for this product is 2.4 GHz
FCC COMPLIANCE
The Adjustable Bed Frame complies with FCC CFR 47 Part 15 Subpart B/C. Operation is sub-
ject to the following conditions:
1. The product may not cause harmful interference
2. The product must accept any interference received, including interference that may
cause undesired operation
To comply with the FCC RF exposure compliance requirements, you may not make any changes
to the product or the antenna. Changes to the antenna or the product could result in the prod-
uct exceeding the RF exposure requirements. This may void your authority to use the product.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a double-insulated product requires
H[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGLVWREHGRQHRQO\E\TXDOL¿HGVHUYLFH
personnel. Replacement parts for a double-insulated product must be identical to the parts
they replace. A double-insulated product is marked with the words "DOUBLE INSULATION"
or "DOUBLE INSULATED." The symbol (square within a square) is also able to be
marked on the product.
10 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
The Adjustable Bed Frame is delivered in two boxes. The boxes contain all the parts and tools
necessary to fully assemble and operate the system. Upon opening the packaging, use this check-
list to ensure all the parts are present and in perfect condition. If any part is damaged or missing,
FRQWDFW/2*,&'$7$<RXFDQ¿QGWKHUHOHYDQWFRQWDFWGHWDLOVDWWKHEHJLQQLQJRIWKH2ZQHUV
0DQXDO(QVXUHWKDWWKHER[HVDUHVWRUHGLQDÀDWSRVLWLRQLQDGU\SODFHDWURRPWHPSHUDWXUH
3. BOX CONTENTS
A
SIDE RAIL (RIGHT)
B
SIDE RAIL (LEFT)
2x CROSSBAR
D
POWER CONVERTER
K
I
CONTROL BOX
POWER CABLES
J
4X CROSSBAR KNOB
E
C
4x LEG
EMERGENCY LOWERING STRAP
Y
X
SYNC CABLE
