56
For connection to:
-
Methane gas
: the pipe must have an internal diameter of 13 mm, be fitted to the pipe holder
and then blocked with a specific clamp as per current installation standards;
-
Liquid gas (bottle)
: the pipe must have an internal diameter of 8 mm, be fitted to the pipe
holder and then blocked with a specific clamp as per current installation standards. The
bottle must be fitted with a pressure reducer as per current installation standards.
Cookers with bottle cupboard IF INSTALLATION STANDARDS PERMIT
. These cookers are
designed prepared for use with bottle of liquid gas (size Ø 270 mm, height 600 mm). They are
fitted with two attachments for the gas connection: one inside the cupboard and one on the back
hand side. The bottle cupboard attachment is sealed with a cap and a gasket, while the other
end is open. If the bottle cupboard attachment is used, the cap must be replaced with the pipe
holder must be connected with a flexible pipe, which must follow the route shown in the
adjacent diagrams and/or on the adhesive plate fitted inside the bottle cupboard door. After
connection, ensure that there are no gas leaks by using a specific instrument or soapy water.
1.5. CONNECTION TO THE ELECTRICITY SUPPLY
The flexible mains lead is supplied connected to a BS 1363 fused plug fused plug fitted with a
fuse of 13 amp capacity. If you need to replace the plug for any reason, it should be carried out
as outlined below:
WARNING: THIS APPLIANCE MUST BE EARTHED.
The wired in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth – Blue= Neutral – Brown= Live
Содержание 8022389009704
Страница 85: ......