4 Installations
4.1 Environmental Conditions
–
No condensing humidity
–
No splashing water
4.2 Placement
When the syringe piston is missing and the syringe is handled in an improper
manner, the product can enter and contaminate the dispenser.
Place the control unit in an elevated position above the syringe!
Do not hold the syringe
(15)
in an elevated position above the dispenser or
with the tip pointing upward!
In work pauses, press the hose clamp closed on the syringe air line adapter!
Hold the syringe correctly for uniform application of the product!
When setting the vacuum, start with the vacuum in the full off position and
increase slowly to ensure product is not sucked back into the unit.
5 Dispensing
5.1 Filling the Syringe
Improper handling of Loctite® brand products may be harmful to ones health!
Observe general safety regulations for the handling of chemicals!
Observe manufacturer’s instructions! Request a material safety data sheet for
the product used!
Close the tip of the syringe with the luer
lock tip cap.
Hold the syringe at an angle to prevent air
bubbles during filling.
Slowly add product into the syringe.
Insert the syringe piston into the syringe barrel.
Depending on the dispensing task, fill
several syringes at the same time.
Store filled syringes with syringe piston,
luer lock tip and syringe end caps in place.
