Using the Teach Mode to set the dispense time.
Press the
button until the LED above TIMER is lit.
Press the
button until the light above it flashes.
Pressure the
button or foot switch for the desired amount of time.
Press the
button to save the data.
Press the
button or foot switch to dispense.
5.2.5 Cycle Mode
After following the steps in 5.2.3 to set the dispense time, follow the steps below
to set the delay between cycles.
Press the
button until the LED above CYCLE is lit.
Press the
button to setup the interval time. Press the
button and the
button to change numbers, and the
button to move the cursor.
Press the
button to save the setting.
Or press the
button until the light above flashes.
Press the
button or foot switch to set the dispense time.
Press the
button to save the data.
Press the
button or foot switch to dispense. The unit will run at the preset
dispense and interval times.
Press the
button or foot switch to stop the cycle.
