6 Cares and Maintenance
6.1 Care
Occasionally the o-ring of the syringe adaptor
(12)
should be lubricated with
silicone grease. This will prolong the life of the o-ring.
Clean hands after application of grease to assure surfaces to be bonded are clean.
Otherwise bonding might fail.
Failure to properly handle cleaning agents may be hazardous to your health!
Observe general safety regulations for the handling of chemicals!
Observe manufacturer’s instructions! Request a material safety data sheet
for the product used!
Recommended cleaning agents for:
–Anaerobic, UV curing, and Chipbonder® adhesives:
There are currently no recommended solvents for removing cured Loctite® brand
adhesives. Fluid adhesive residues can be removed with various solvents.
ACETONE is well suited for this application.
–
Cyanoacrylate adhesives:
The best solvent is ACETONE for both cured and fluid cyanoacrylates.
6.2 Maintenance
The unit requires no special maintenance.
