LockMaster LKM700 Скачать руководство пользователя страница 22

Страница: 22 / 24

7000INST Copyright Lockmasters, Inc. 5/25/11

lKM7000

Installation

Step 24 - Strike Adjustment

Step 24A – Close the door to ensure proper function. Make sure that no part of the

Inside Base Plate is rubbing the strike. Now is the time to make adjustments to the

strike if necessary. Minor adjustments can be made to the strike by either:

1. Loosen the center alignment screw.

2. Add paper shims provided with the strike.

3. File the adjustment tabs cast into the strike.

Once the strike is correctly aligned with the Inside Base Plate, tighten the alignment

screw.

Step 24B – Secure the Strike. Center punch the (4) remaining strike screw holes.

Step 24C - Use a #25 drill bit to drill the pilot holes.

Step 24D - Use an 10-24 tap and tap the remaining (4) holes.

Step 24E - Attach the strike to the door frame with the (4) 10-24x1” screws provided

and tighten.

24a - Close the door and check strike align.

24b - Center punch the (4) remaining strike screw

holes.

24c - Use a #25 drill bit to drill pilot holes.

24d - Use a 10-24 tap and tap the remaining (4)

holes.

24e - Attach the strike to the door frame

Strike Attached.

Содержание LKM700

























Результаты поиска

Содержание LKM700

Отзывы:

Похожие инструкции для LKM700

Бренды по названию

Популярные бренды

LockMaster LKM700, Руководство по установке

Результаты поиска

Содержание LKM700

Отзывы:

Похожие инструкции для LKM700

Бренды по названию

Популярные бренды